Company uniforms, workwear & branded jackets From your brief to your brand ↗
Navy piqué polo flat on a light table with a small embroidered left-chest logo and a ruler beside it

Polo Shirt Logo Placement and Size Guide for Company Teams

Quick answer: For company polos, the left chest is the default logo position. Keep it to about 5 cm high and no more than 10 cm wide, and simplify artwork so English letters are at least about 0.5 cm² and lines at least 1.5 mm wide for embroidery. Add secondary marks on the sleeve, back yoke or nape only if they have a job to do. Then build a size list in M to 4XL from a flat chest measurement. At KERVIMO you can mix colours and sizes within 100 pieces per style, and in-stock polos with your logo ship in 15 days after sample approval.

This guide is for marketing, HR and events teams preparing a polo order. It covers where logos go, how big they should be, what embroidery can and cannot reproduce, and how to size a mixed team.

If you are choosing a corporate cotton-blend polo and want a walk-through of fit and fabric on one catalogue style, start with our article on the 68001 corporate polo: fit, fabric and logo placement. That post is built around a single style. This page is the planning guide for logo position, size and embroidery limits on a team order, whichever style you choose. For ready-stock bodies that can be branded and shipped after you approve the sample, see in-stock polo shirts with your logo.

0.5 cm²

min. English letter for embroidery

1.5 mm

min. embroidered line width

100

pieces per style, mixed sizes

M–4XL

core size range

Navy piqué polo flat on a light table with a small embroidered left-chest logo and a ruler beside it

Where to put a logo on a polo

PositionBest forNotes
Left chestPrimary company logoThe standard. Sits where the eye naturally lands and where badges sit on other uniforms.
Right chestName, department or a second brandBalances a left-chest logo; keep it smaller.
SleeveEvent, partner or flag marksUpper sleeve, centred on the outer arm. Keep artwork compact.
Back yoke / napeSmall secondary mark or websiteVisible when staff face away; avoid large blocks of text.
Full backEvent crews, volunteersUsually printed rather than embroidered on piqué.
Placement is confirmed on your paid branded sample before bulk.

One strong mark beats four competing ones. If a second position is not needed for identification, leave it out.

How big should a left-chest logo be?

Size the logo to the garment, not to a screen. The mark should sit clear of the placket and the armhole seam and look balanced on the smallest size you order as well as the largest.

KERVIMO’s normal left-chest size is about 5 cm high and no more than 10 cm wide. The exact size depends on the logo’s shape and how many letters it has: a compact icon can sit near the full height, while a long wordmark is limited by the 10 cm width. Position is set on your branded sample.

Three polos in sizes M, XL and 4XL laid side by side, each with the same left-chest logo, showing proportion

Design the logo for the chest of a size M polo, then check it still looks right on a 4XL.

What embroidery can reproduce

KERVIMO works to these planning references for embroidery. They are guides, not machine limits:

Gradients, photo detail and hairline strokes do not translate into thread. Simplify them, or choose a print method such as heat transfer. The custom embroidery page shows stitch types.

Logo methods on KERVIMO polos

Embroidery, chain-stitch embroidery, towel embroidery, heat transfer, reflective heat transfer, screen printing, puff print, 3D silicone, holographic transfer and high-frequency embossing. Quick-dry polyester styles such as 98011 are often better suited to transfers; piqué cotton blends such as 2208 take embroidery well.

Macro of a satin-stitch logo on white piqué beside a heat-transfer logo on a quick-dry polo

Logo colour and contrast

A logo that works on white may disappear on navy or heather grey. Decide early which polo colours each logo will sit on, then choose thread or print colours for each one.

Approve contrast on the paid branded sample, in daylight and under your venue lighting, before bulk production starts.

Prepare artwork that works

  1. Send vector files: AI, EPS, PDF or SVG.
  2. List thread or Pantone colours; screens shift colour.
  3. Provide a one-colour version for small or tonal use.
  4. Mark each position and its intended width.
  5. Say which polo colours each logo goes on, so contrast can be checked.
Printed size-split sheet beside folded polos, with a vector artwork printout and thread-colour cards

Size a mixed team

Most KERVIMO polos run M to 4XL; 2261 also comes in S. Measure a well-fitting polo flat, armpit to armpit, and compare it with the chart. On 2208, the half chest is:

SizeMLXL2XL3XL4XL
Half chest (cm)485052545658
2208 garment measurements from the product page; body length runs from 65 cm (M) to 73 cm (4XL). Other styles differ; check each chart.

Slim styles sit closer to the body; regular and relaxed styles give more room. Because sizes mix within 100 pieces per style, you can order exactly the split your team needs.

Build the size split

  1. List each wearer and their measured size.
  2. Add a small buffer for new starters if your budget allows.
  3. Total per colour and size; each style must reach 100 pieces.
  4. Keep the sheet as your reorder record.
Spreadsheet-style size split printed on paper next to folded polos sorted by size tags

From approval to delivery

Send style codes, artwork and the size split for a written quote. A paid branded sample is dispatched within 15 days; check placement, size and colour on it. After approval, in-stock polos with your logo ship in 15 days. See in-stock polo shirts with your logo for the styles, and the 68001 corporate polo article if you are deciding fit and fabric on that style first.


FAQ

Where should a logo go on a polo shirt?

The left chest is the standard position for a company logo. Right chest, sleeve, back yoke and nape suit secondary marks such as names or partner logos.

How big should a left-chest polo logo be?

Normally about 5 cm high and no more than 10 cm wide, depending on the logo’s shape and how many letters it has.

What is the smallest text you can embroider?

As a planning guide, English letters need about 0.5 cm² each, Chinese characters about 1 cm², and lines at least 1.5 mm wide.

Should I embroider or print my polo logo?

Embroidery suits piqué cotton blends and reads as permanent. Transfers and prints suit quick-dry fabrics, gradients and large back designs.

What file should I send?

A vector file (AI, EPS, PDF or SVG) with thread or Pantone colours and the intended width for each position.

Can I mix sizes in one order?

Yes. Colours and sizes can be mixed within the 100-piece minimum per style.

What sizes are available?

Most styles run M to 4XL, with style 2261 also in S. Each product page has a size chart.

How long does it take?

A paid branded sample is dispatched within 15 days. After approval, in-stock polos with your logo ship in 15 days.

How is this different from the 68001 corporate polo article?

The 68001 article walks through fit, fabric and logo placement on that one style. This page is the planning guide for logo size, position and embroidery limits on a team order, across styles.

Get your logo checked

Send your artwork, positions and size split. We will confirm what embroiders cleanly and quote the sample.

Planning a first order of 100 pieces, or US landed cost, is covered in custom polo MOQ, pricing and US import duty. For Quick-Dry team shirts, see custom performance polo shirts for teams.

YOUR TEAMWEAR BRIEF

My selection

Save styles, colors and quantities. Your inquiry brings these choices together.